Product

Contact Us

	+8615919783235
	+8615919783235
	Kevin zhang
	Sales@jad-leds.com
	JIAANDA
	3th Floor, Building C, No. 47, East Baoshi Road, Shuitian Community, Shiyan Street, Baoan District, Shenzhen ,Guangdong, China

You are here：Home >> Product >> LED addressable strips... >> DC5V Pixles LED Strip...

DC5V Pixles LED Strip

< >

WS2812B RGB 30LEDs/m pixel LED strip DC5V Black /White FPCB

WS2812B LED strip

IC type :WS2812B IC

Color order : G R B（NOT RGB）

Gray level: 256

View angle: 120°

Input voltage: DC5V

LED strip width: IP30 IP65 :10mm

LED strip width : IP67:12mm( include silicone sheathing)

Color: full color 24-bit

FPCB board color: Black/White

Power:0.1W~0.3W/LED 15W~45W/16.4ft

Recommended power supply：DC5V10A (50W)

Standard Reel Length:16.4FT/reel 5meters/reel

Model: WS2812 strip 5050rgb chips

Operating Temperature: -20 ~ +40°C

Length xWidthx Height： IP30:5000mmx10mmx2mm IP65:5000mmx10mmx3mm IP67:5000mmx12mmx3.85mm

Waterproof level: IP30/IP65/IP67

Double Side Tape: IP30/IP65 . There is no double side tape on IP67.

Light up 1 color（red or green or blue) 0.1W/LED . Light up 2 colors (red+green) 0.2W/LED , Light up 3 colors (red+green+blue=mixed white) 0.3W/LED

Product Decsription:

1. WS2812B Led Strip is Powered By "5V Power Supply" (Not Included) And Is Controlled By A Single Data Line From A Suitable Controller (Not Included).

2. 3-Pin JST Connector Included: Red:VCC, Withe:GND, Green:DATA.

3.Every LED has its own IC chip. One IC drives one led. The chip is built-in the LED.Biult-in IC chip .

4.Every LED can be cut off, led strip still working after it is cut.

5. The Strip Has 3M Adhesive Tape On The Back(Except Ip67). Installation Surface Must Be Smooth, Clean And Dry.

6. Led Strip Can Be Cut Between Every Led To Create Custom Lengths.

7. Do Not Bend Strip Sharply.

8. Longer Runs Should Be Powered From Both Ends To Reduce Voltage Drop.

9. 3-Pin JST Connector Wire is 20AWG.