Product Decsription:
1) SK6812RGBW Led Strip is Powered By "12V Power Supply" (Not Included).
2)You must need SP105E/SP107E/SP108E/K-1000C Controller to control it.
3) 3-Pin JST Connector Included: Black:GND, Green:DATA,Red:VCC,
4) The Strip Has 3M Adhesive Tape On The Back(Except Ip67). Installation Surface Must Be Smooth, Clean And Dry.
5) Led Strip Can Be Cut Between Every 1Led To Create Custom Lengths.
6)Do Not Bend Strip Sharply.
7)Longer Runs Should Be Powered From Both Ends To Reduce Voltage Drop.
8)3-Pin JST Connector Wire is 22AWG
403972952
mail
+8615919783235
JIAANDA
Kevin zhang