Characteristic:
1. SK9822 Led Strip is Powered By "5V Power Supply" (Not Included) And Is Controlled Dual signal (Data,Clk) control.
2. 4-Pin JST Connector Included: Red:VCC, Black:GND, Green:CLK, Yellow:DATA
3. SK9822 IC embedded in SMD5050 RGB LED. each led is programmable.
4. White PCB/Black PCB available, IP21/IP65/IP67/IP68 available.
5.Every LED can be cut off, led strip still working after it is cut.
6. Both ends wired with 150mm/5.9" 20Awg wire and JST 4Pin male/female connector
7. The Strip Has 3M Adhesive Tape On The Back(Except Ip67). Installation Surface Must Be Smooth, Clean And Dry.
8. Do Not Bend Strip Sharply.
9. Longer Runs Should Be Powered From Both Ends To Reduce Voltage Drop.
10. Controller System：SD controller , DMX controller , Artnet.
403972952
mail
+8615919783235
JIAANDA
Kevin zhang